ja4dtp

Hiroshima　　　　GooglePosition

Self-made Rig	It seems to be working in FB, but it seems that it is hardly operational at present due to the relationship with the linear amplifier. It seems that ISB music is transmitted with a dummy load, and the homemade receiver receives ISB and is grinning.
ANT	W Inverted V (Diamond 8010) I think this is a greedy antenna that can probably reach from 3.5M to 50M (including the work band), but I'm not sure which are the elements and which are the stay wires.
TX_Uranuｓ	The FB Exciter is crying. Please complete the PA-50 and put it into operation as soon as possible.
RX_Uranus	This is an all-band PSN receiver using Colinns' mechanical filters (2.7K and 4K) and wideband Cerafil. Most of the axial/radial components on the DDS board are mounted on the solder side, making it easy to modify or replace the surface-mounted ICs. The soldering of the CPU is not so good.
Microphone	It seems that you don't need any microphones other than the Sony one in the middle, but the one on the far right is probably a microphone homemade with Primo Element.
PA-50	Complete the PA-50 (50W power amplifier), the excellent heat sink (copper) is milled and cleaned, please combine the two units to complete it.
Pluto	This is the first generation PSN all-band transmitter. It's one of my favorite sets with the LED display. I'd like to redesign the inside and make it with this display method. The panel is very well processed.
Power Meter	Z-500 This power meter is excellent, allowing you to directly view the SWR/FWD-PW/REF-PW while talking.
GPS	I think the Director General was the first to complete the GPS using NEO6M, and it has been nicely put together in a box.
Relay installation method	I often use Akizuki relays, but when I try to reuse used ones, they often become defective. This is because the high heat from the iron can cause problems. For this reason, I decided to use the relay via a socket.